Zeiss LSM 900 with Airyscan 2 & jDCV
Available

Zeiss LSM 900 with Airyscan 2 & jDCV

Zeiss LSM 900

Request Quote
Commercial Rate

This inverted (Axio Observer 7) confocal imaging workstation produces super-resolution, high-contrast images while minimizing light exposure, to reduce photobleaching and channel bleed-through. The system has a diode laser module allowing for light emission at 405 nm, 488 nm, 561 nm, and 640 nm. It utilizes two GaAsP PMT detectors, one transmitted light detector, and an Airyscan 2 detector with Multiplex Mode for super-resolution imaging along with adaptive focusing capabilities. The Airyscan 2 is an area detector with 32 detection elements which allows for rapid confocal imaging for spatial and temporal recordings, as well as generating mosaic tiling for multidimensional reconstruction. The microscope performs deconvolution using LSM Plus and Joint Deconvolution (jDCV), using a dedicated computer workstation. LSM Plus uses a Wiener filter to enhance signal noise, improve resolution, and provide spatial information. jDCV works alongside the Airyscan 2 detector to add additional structural information and further improve resolution. The system uses an Axiocam 705 mono, which provides high-resolution monochrome image capture, low light fluorescence imaging, high frame rate imaging, and broad spectral sensitivity from UV to near-IR light. The microscope is equipped with a motorized stage suitable for tiling of large areas and a Z piezo stage to generate Z-stacks with precision. For multi-day, multi-position time-lapses, the system utilizes Definite Focus 3 to compensate for focus drift, resulting in sharp, high-contrast images. An opaque, integrated incubation module creates stable temperature conditions when imaging temperature-sensitive samples and eliminates the effects of potential ambient light. The objectives include EC-Plan NEO 2.5X 0.085 NA; Plan-APO 10X 0.45 NA; Plan-APO 20X 0.8 NA; Plan-APO 40X 0.95 NA; C-APO 40X 1.2 NA W; Plan-APO 63X 1.4 NA Oil. The purchase of the Zeiss 900 LSM for the Advanced Imaging and Microscopy Core Facility in the School of Medicine was made possible due to the support of NIH S10OD034427.

Capabilities

  • βœ“super-resolution imaging
  • βœ“high-contrast images
  • βœ“minimizing light exposure
  • βœ“reducing photobleaching
  • βœ“channel bleed-through reduction
  • βœ“light emission at 405 nm, 488 nm, 561 nm, and 640 nm
  • βœ“rapid confocal imaging
  • βœ“spatial and temporal recordings
  • βœ“mosaic tiling for multidimensional reconstruction
  • βœ“deconvolution using LSM Plus and Joint Deconvolution (jDCV)
  • βœ“high-resolution monochrome image capture
  • βœ“low light fluorescence imaging
  • βœ“high frame rate imaging
  • βœ“broad spectral sensitivity from UV to near-IR light
  • βœ“tiling of large areas
  • βœ“Z-stacks with precision
  • βœ“multi-day, multi-position time-lapses
  • βœ“focus drift compensation
  • βœ“stable temperature conditions
  • βœ“observing cell signaling
  • βœ“in-situ hybridization
  • βœ“protein expression and localization
  • βœ“interactions between molecules and proteins
  • βœ“spatial reconstruction
  • βœ“spatial-temporal relationships
  • βœ“subcellular transport

Similar Instruments

Zeiss LSM 710 NLO
available
Microscopy

Zeiss LSM 710 NLO

Zeiss β€’ LSM 710 NLO

$0.00/hr
Loma Linda University
0.0(0)
Zeiss Axio Imager A1 upright microscope
available
Microscopy

Zeiss Axio Imager A1 upright microscope

Zeiss β€’ Axio Imager A1

$0.00/hr
Loma Linda University
0.0(0)
Zeiss LSM 800 W/3 Channel GaAsP Detection
available
Microscopy

Zeiss LSM 800 W/3 Channel GaAsP Detection

Zeiss β€’ LSM 800

$100.00/hr
California Institute of Technology
0.0(0)
Zeiss LSM 880 with Fast Airyscan
available
Microscopy

Zeiss LSM 880 with Fast Airyscan

Zeiss β€’ LSM 880

$100.00/hr
California Institute of Technology
0.0(0)