Available
Dynamic Mechanical Analyzer - TA Instruments Q800
TA Instruments Q800 (2025)
Request Quote
Commercial Rate
Located in Saab ETIC 114. Available fixtures: Dual/Single Cantilever, 3-Point-Bend, Compression & Film Tension. The first training takes 1 hour for 1 fixture and each additional fixture is an additional 15 minutes. Sample dimensions detailed in the attached document below. Commonly, the DMA is helpful with finding Tg (Glass transition temperature), tan delta, and creep. If you have needs not listed here, please feel free to reach out for us to discuss. All new users can contact Violet Sullivan to discuss training at violet_sullivan@uml.edu. Additional pricing for academic and government groups is available upon request.
Capabilities
- âDynamic mechanical analysis
- âGlass transition temperature measurement
- âTan delta measurement
- âCreep testing
- âViscoelastic property analysis
- âMultiple fixture configurations
Specifications
| fixtures | Dual/Single Cantilever, 3-Point-Bend, Compression & Film Tension |
| trainingTime | 1 hour for 1 fixture + 15 minutes per additional fixture |
| measurements | Tg (Glass transition temperature), tan delta, creep |
| documentation | Sample dimensions detailed in attached document |
| contactInfo | [object Object] |
Similar Instruments
available
$22.00/hr
University of Massachusetts Lowell
0.0(0)
available
$0.00/hr
University of Massachusetts Lowell
0.0(0)
available
$130.00/hr
University of Massachusetts Amherst
0.0(0)
available
Mechanical Testing
Instron Hydraulic Materials Testing Device with Digital Image Correlation (DIC)
Instron ⢠Hydraulic Tester
$150.00/hr
University of Massachusetts Dartmouth
0.0(0)